TTR-10AK | TTR-10AT | TTR-10AB Tripod Turnstile

Motorized Turnstile for Indoor Areas
with automatic Anti-Panic Folding Arms

ttr-10a_01_page_full
Contact-Button
  • TTR-10AK | TTR-10AT | TTR-10AB Tripod Turnstile
  • Robust Stainless Steel Housing
  • Space-Saving motorized Solution
  • 3 Versions (Wall, Railing or Floor Mounting)
  • Automatic “Anti-Panic” Folding Arms
  • Dynamic LED Display on the Front
  • Turnstile with built-in Electronics
  • RFID Option on Request

Operating
Voltage

Turnstile passage directions

Passage
Directions

Turnstiles 30 persons/minute

Persons/
Minute

Temperature
Range

Turnstile IP 54 protection

Protection
Rating

turnstiles anti-panic arms

Anti-Panic
Arms

Fitting Products

bh-02

BH-02 Railing System

WHD-05 Electromechanical Swing Door

WMD-05S Motorized Swing Door

ic03.1

IC-03 Reader Post with LCD Screen

The TTR-10AK | TTR-10AT | TTR-10AB Turnstile is a compact and space-saving Locking Device. The turnstile is available in 3 Versions. The TTR-10AK is designed for wall-mounting. It is used to control the flow of people at the entrances of industrial companies, banks, administrative offices, shops, railway stations and airports. TTR-10AT has been specially designed for handrails in buses or for railings. It is used in the transport industry as a locking device in automatic fare management systems. The TTR-10AB Turnstile is specially designed for floor mounting and is suitable for office buildings or industrial plants.

The Anti-Panic Function ensures free emergency exits in emergencies.
The upper anti-panic locking arm automatically folds down as soon as an emergency signal is triggered (e.g. by power failure).

This robust tripod turnstile can be used in many different ways:

Office Buildings
Airport Passageways
Train Stations
Bank Buildings
Public Transport

3 years warranty after the date of sale

Elegant Design combined with Robustness

The motorized TTR-10AK | TTR-10AT | TTR-10AB tripod turnstile consists of robust stainless steel. It impresses with its modern and compact design and high corrosion resistance. The TTR-10AK is designed for space-saving wall mounting. It is used to control the flow of people at the entrances of industrial companies, banks, administrative offices, shops, railway stations and airports. TTR-10AT is specially designed for handrails in buses or for railings. It is used in the transport industry as a blocking device in automatic fare management systems. TTR-10AB is designed for floor mounting and is suitable for applications where wall mounting is not possible.

Thanks to its IP 54 protection class, it is suitable for demanding indoor applications.
It easily withstands fluctuating temperatures from -40 °C to +55 °C.

The tripod turnstile is equipped with tripod folding arms.
The tripod turnstile allows sufficient space for your passengers with a passage width of 50 cm.

Optimal Performance with High User Density

The turnstile has a passage frequency of up to 30 persons per minute. It can also be passed bidirectionally.
It has a total capacity of 3,000,000 passages and an operating time of 8 years.

For optimum performance, we recommend installing a turnstile for a maximum of 500 people at a time.

The power supply board is located in the housing. After each pass, the reset mechanism returns the locking arms to their original position.
The built-in hydraulic damper ensures smooth and quiet operation of the turnstile.

Perfectly prepared for Emergency Situations

The special tripod folding arms are equipped with an automatic anti-panic function.
The automatic “Anti-Panic” folding arms allow a fast evacuation of up to 60 people per minute in case of emergency.
In the event of a fire alarm, the locking bar automatically folds down and ensures a free passage.

When power is restored, the anti-panic folding arm must be manually returned to its original position.
It is possible to connect the sensor of the passage zone control and a siren to the turnstile.

Easy Operability

The turnstile can be operated via the ACS controller, the RC panel or the WRC (optional).

RFID Option for Clear Identification

The housing of the turnstile has the needed equipment to install a RFID Proximity Card Reader.
With the use of RFID Readers, the passing of the turnstile with a special RFID Chip Card or transponder, is possible.
Die service zone of the reader is on the lateral covers of the turnstile and labelled with special Pictogramms.

  Technical Data
Operating Voltage 24 V DC
Power Consumption 150 W
Consumption Current 5.5 A
Communication Interface Ethernet
Card Reader (optional) 1
Reading Range min. 6 cm
Number of Cards 50.000
  Performance Characteristics
Number of Passage Directions 2

Throughput Rate
(in the single passage mode)

———————————–

Throughput Rate
(in the free passage mode)

30 Persons / min

———————————–

60 Persons / min

Mean Lifetime 8 Years
Mean time to failure 3 000 000 Passages
“Anti-Panic” Function automatical
Warranty Time 3 Years from the date of sale
  Physical Characteristics

Dimensions
(Length × Width × Height)

———————————–

Passageway Width

TTR-10AK | TTR-10AT: 613 × 800 × 696 mm
TTR-10AB: 1.055 × 806 × 762 mm———————————–500 mm
Operating Temperature -40 °C to +55 °C
IP Protection Class IP54
Housing | Rails |
Barrier Arms
Stainless Steel
stainless steel

Send your inquiry to: info@idtronic-secureaccess.com

Or get in touch with us via our contact form: